Send Inquiry

Request To Call Back

Voltage Stabilizers

Price 2050000.0 INR/ Unit

Get a Price/Quote

MOQ : 1 Unit

Voltage Stabilizers Specification

Input Voltage
1200 Volt (V)

Output Voltage
240-440 Volt (V)

Phase
Three Phase

Warranty
Yes

Weight
200-600 Kilograms (kg)

Usage
For Offices, Commercial Buildings, Telecom Industry

Display
Meter

Product Type
Stabilizers

Voltage Stabilizers Trade Information

Minimum Order Quantity
1 Unit

Payment Terms
Telegraphic Transfer (T/T), Cheque

Supply Ability
5 Units, Unit Per Month

Delivery Time
2-8 Week

Main Export Market(s)
Western Europe, Australia, North America, Eastern Europe, Middle East, Central America, South America, Asia, Africa

Main Domestic Market
All India

About Voltage Stabilizers

Having immense experience of more than three decades, we have been engaged in manufacturing, exporting and supplying Voltage Stabilizers. The offered stabilizers are highly demanded in industrial and commercial sector to compensate voltage fluctuations in main power. These stabilizers are manufactured using quality-approved components and cutting-edge techniques in tandem with industry norms. Moreover, the provided Voltage Stabilizers can be availed from us in several technical specifications at reasonable prices.

Voltage Stabilizer

Introduction:
Fluctuations in the voltage is a constant feature of Electricity supply we get. Constant fluctuation of a voltage leads to frequent breakdown and higher rejection in end product. We know that 90% of industrial load is of motor. It draws high current at high & low voltage. This higher current produce higher losses in electrical motors. These losses in motor increase the losses in Cables, Switches, Transformers and other associated equipments.
This higher current effects the electrical motor (particularly smaller capacity motor up to 7.5 H.P)in 3 ways

	Higher current produce higher loss in electrical motor which cause premature failure of winding.
	These higher losses of electric motor also increase the losses of cable, switches, transformer &other associated equipment.
	For smooth continuous operation of motor, over load relay are usually set at 20% higher selling.
With the installation of the stabilizer & maintains 390/400 volt, the motor will operate smoothly drawing 15-20% lesser current & correspondingly the relay setting can be reduced by 15-20%.
Construction:
The Buck/Boost and Regulator Transformer winding are built from paper covered electrolytic copper strip or enamelled copper conductor (Dried in oven). The core is built of high grade cold rolled grain oriented silicon lamination (CRGO) to minimise iron losses. All components of equipment mounted on a framework of M.S. housing are fitted with cooling pips to provide natural cooling. We provide a vertical Rolling Contact types voltage regulator with having sections and paper covered copper strip and fitted with carbon roller assembly which offer higher reliability than ordinary carbon brushes. It is also built with high quality meter switches and indicators. It is designed for 30-35 Degree Centigrade above ambient suitable for any kind of ambient temperature condition. Oil which is used as a coolant is of IS: 335 standards being used & it is properly filtered before topping.

Standard Fitting & Accessories:

-Rating Plate
-Lifting Lug
-Drain valve
-Oil Level
-Oil Filling hole and plate
-Wheels
-Control MCB's [1.0 Amp for motor load & 0.5 Amp for voltmeter & indicators]

General Specification:

Bharti's Automatic Servo Stabilizer are available in wide range and various models. The standard three phase models are suitable for balanced and unbalanced supply and loads. The standard model confirm the following specifications are as follow:

Automatic Voltage Regulator - Regulator with Carbon
Regulator with Carbon
Roller Assembly

Input Voltage	:	300-460V 320-460V 340-460V 360-460V.
Efficiency	:	Better than 99%.
Output Voltage	:	400V, +/- 1%, Phase, 50HZ.
Ambient	:	0-35C max relative humidity upto 90%
Environment	:	Designed for Indoor tropical use
Wave from distortion	:	Virtually Nil.
Duty Cycle	:	100% Continous.
Correction Rate	:	8-10V/Sec. (Upto-500KVA).
Mounting	:	On Uni-directional wheels.
Cooling	:	Air Cooled/Natural Oil Cooled.

NOTE: Different Non-Standard input & output ranges are also available against specific requirement.

Comparison between Bharti s make & Conventional make Automatic Voltage Regulator:

Bharti make roller type Regulator

Conventional make with carbon brush Regulator

	Suitable for 100% continuous duty cycle
	Power consumption is 0.5 to 1.5% depending upon the model & input voltage variation.
	Life at full load is 15-20 years
	Negligible losses at full Buck/Boost conditions.
	5 years unconditional guarantee in india.
	As losses are less, heat generated is less. The size of stabilizer is very compact. Quantity of oil is less.

	Suitable only for partial load 50-60%
	Power consumption is 2-7%
	Max. life is 3-5 years at full load
	Max-losses in full Buck/Boost condition
	Normal guarantee/warrantee for one year
	Heat generated is more. Size is bulky. Quantity of oil is more.

More Uses:

1. In residential area, we usually face unbalanced input voltage, in that case Automatic Voltage Controller is used to Overcomethis problem. This unbalanced voltage usually causes the failure or damage of motors, machines, electronic items used in houses, tubes, bulbs, fans etc. If you find input voltage is above 230 Volt single phase/400Volt three phase even for few hours a days, then you definitely require a stabilizer.

2. Industries which have installed OLTC with transformer also require Stabilizer because with help of Stabilizer, we don't have to change the tapping of OLTC frequently. However range of Stabilizer can be kept low where OLTC is installed
.

Table:

INPUT	Motor Load Below 10HP		Lighting Load
INPUT	% Reduction in Breakdown	Power Saving	%Reduction in Breakdown	Power Savng
380/400	NIL	NIL	NIL	NIL
380/420	5%	3%	10%	5%
380/440	10%	5%	20%	10%
380/460	40%	7%	40%	20%

Servo Control Card

Loss Comparison of Bharti Make Regulator & Conventional make regulator:

Capacity	Bharti	Conventional
60A	570W	1055W
75A	730W	2050W
100A	905W	3100W

Advantage:
1. Save Energy.
2. Less production losses and better efficiency in plant.
3. Induction motor operate at high efficiency.
4. Improvement in power factor & reduction in MDI.
5. 80% depreciation as per Income tax in India Only.
6. Reduction in breakdown of electrical equipment.

Application:
We can use stabilizer for various kind of application such as:

1. Engineering Units
2. Rice Shellers
3. Cold Storages
4. Textile Mills
5. Paper Milles

6. Rolling Mills
7. Footwear and Leather Units
8. Distilleries & Beverages
9. Rubber/Plastic Industries
10.Tea Estates

11. Pharmaceutical units
12. Cement Mills
13. Flour Mills
14. Hospitals
15. Hotels/Clubs

Superior Voltage Regulation for Commercial Needs

Our three phase voltage stabilizers are optimized to provide consistent voltage output, not only protecting your equipment but also ensuring operational efficiency in offices, commercial buildings, and telecom infrastructure. Capable of handling high input voltages up to 1200V, these stabilizers are ideal for environments where power fluctuations can cause costly downtime or equipment damage.

Reliable Performance Backed by Warranty

Every stabilizer unit is supplied with a warranty, providing peace of mind over product performance and durability. The solid design, coupled with a convenient meter display, allows for easy monitoring and quick diagnostics, ensuring stable power distribution over years of intensive use.

FAQ's of Voltage Stabilizers:

Q: How do voltage stabilizers protect office and commercial equipment?

A: Voltage stabilizers automatically regulate incoming voltage fluctuations, ensuring sensitive office and commercial equipment receives a stable output between 240-440V. This minimizes the risk of damage due to voltage surges or drops, extending equipment lifespan and reducing maintenance costs.

Q: What is the installation process for a three phase voltage stabilizer in a commercial building?

A: Installation should be conducted by a qualified electrician familiar with three phase systems. The stabilizer is connected between the power supply and the building's main electrical panel. Our team, as your supplier or manufacturer in India, can assist with site assessment and installation guidance if required.

Q: When is it advisable to use a voltage stabilizer in the telecom industry?

A: A voltage stabilizer is highly recommended in the telecom industry whenever equipment is exposed to frequent power fluctuations or installed in areas with unstable grids, as uninterrupted voltage stability prevents communication breakdowns and equipment malfunctions.

Q: Where can these voltage stabilizers be sourced within India?

A: Our voltage stabilizers are available across India through our extensive distributor, supplier, and trading network. As manufacturers and exporters, we ensure nationwide accessibility and prompt support.

Q: What is the benefit of the meter display on the voltage stabilizer?

A: The meter display provides realtime information on input and output voltages, enabling users to monitor system performance and quickly detect any anomalies, helping ensure optimal operation and safety.

Q: How does the warranty benefit commercial buyers?

A: The warranty offers protection against manufacturing defects and unexpected failures, ensuring that commercial buyers experience minimal downtime and have access to support or replacement if necessary during the warranty term.

Tell us about your requirement